This UTP Cat6 Keystone Jack 180 Degree With(Red and Green) LED is a new type of keystone jack, which is becoming more and more popular among our customers from the world. It is widely used in houses, companies, teaching facilities and other structured cabling systems. It is made of high quality material and with good performance, which makes it have UL/RoHS/CE certificates.
1.UTP Cat6 Keystone Jack 180 Degree With(Red and Green) LED Introduction
Due to small design, this keystone jack matches with different kinds of faceplates and blank patch panels.
2.UTP Cat6 Keystone Jack 180 Degree With(Red and Green) LED Parameter (Specification)
Below are the electrical and mechanical datas of this UTP Cat.6 180 degree keystone jack with LED:
Voltage Rating | 125 VAC RMS |
Current Rating | 1.5 AMP |
Contact Resistance | 20 Milliohms Max |
Insulation Resistance | 100 Megohms min @ 500 VDC |
Dielectric Strength | 750 VAC RMS 60Hz, 1Min |
C5e Permanent Link | Conform to ANSI/TIA/EIA-568B.2-1 |
TIA Cat.6 Perm. Link Test | Worst pair NEXT margin≥5.0 DB |
Retentiveness of insertion structure | 50N 60±5s |
3.UTP Cat6 Keystone Jack 180 Degree With(Red and Green) LED Feature And Application
This UTP Cat.6 180 degree keystone jack with LED is 180 degree design, which makes the termination quite convenient. And there’s a dust cover with each keystone jack, to protect the keystone jack from damaged and also keep the dust away.
This keystone jack can be used with faceplate and back box, as a combination, used in structured cabling system.
This keystone jack has LED assembled inside, which would flicker with red and green light when the signal successfully pass through. You wouldn’t need test tool to know if it is connected correctly or if there’s any reject with accessories.
4.UTP Cat6 Keystone Jack 180 Degree With(Red and Green) LED Details
Material and other mechanical datas of this UTP Cat.6 180 degree keystone jack with LED:
Housing Material | PC (UL94V-0 rated material is also available) |
PCB Material | FR-4 T=1.6mm |
Contact Material | Phosphor Bronze Stamp Pin T=0.35mm |
IDC Contact Material | Phosphor Bronze, T=0.5mm with Tin Plated |
RJ45 Jack Life | 750 Times min |
IDC Life | 200 Times min |
5.UTP Cat6 Keystone Jack 180 Degree With(Red and Green) LED Qualification
This UTP Cat.6 180 degree keystone jack with LED complies with ANSI/TIA/EIA-568-C.2 standard. This keystone jack is made of high quality material and with good performance, which makes it have UL/RoHS/CE certificates
6.Deliver,Shipping And Serving
UTP Cat.6 180 degree keystone jacks with LED will all be well packed before delivery. Cartons can be palletized if required.
We also provide free service to design customized packets.
It’s quite convenient to deliver the goods from our factory to Ningbo port and Shanghai port.
Start with quotation, sample preparation, answering queries about specifications, and even complaint if it happens, you can always get prompt response.