Patch Cord FTP Cat.6 1M

1.Patch Cord FTP Cat.6 1M Introduction

This FTP Cat.6 patch cord is a high performance component, available in broad range of length and can be different colors.
Each wire consists of stranded bare copper, guarantees transmission rate and network stability.

2.Patch Cord FTP Cat.6 1M Parameter (Specification)

Construction of this FTP Cat.6 patch cord:

Minimum Bending Radius: 8D

3.Patch Cord FTP Cat.6 1M Feature And Application

This FTP Cat.6 patch cord supports high density installation, fits into narrow jack locations.
It is used to connect equipment room with working area, to achieve signal transmission.

4.Patch Cord FTP Cat.6 1M Details

All FTP Cat.6 patch cords are 100% tested before packed. Any open, miswiring, short or intermittent is not permitted.
After crimping the distance between the bottom of contact and the top surface of plug is 5.90~6.146mm.
Installation Temperature: -30~+50℃

5.Patch Cord FTP Cat.6 1M Qualification

The FTP Cat.6 patch cord must be tested with Channel test and Fluke DSX-5000.
It complies with the standards of RoHS, ISO/IEC-11801, TIA/EIA-568B.

6.Deliver,Shipping And Serving

FTP Cat.6 patch cord will all be well packed before delivery.
Cartons can be palletized if required.
We also provide free service to design customized packets.
It’s quite convenient to deliver the goods from our factory to Ningbo port and Shanghai port.
Start with quotation, sample preparation, answering queries about specifications, and even complaint if it happens, you can always get prompt response.

7.FAQ

For this FTP Cat.6 patch cord, we provide Surlink brand products, and also take OEM orders.
We can make your logo printed on the jacket.
We have our own factory,  which guarantees the most competitive prices of the products.
There is R&D department, which insures the performance of each product and the improvements, and QC department to control the quality of incoming raw material and the quality of final products.